MSEL stocks a wide range of heatshrink & sleeving supplies. We keep a full range of the motorsport standard Raychem DR-25 and the associated Raychem molded boots. We not only cater for the high end market, but also have a range of alternate options that are lower cost or less labour intensive. Along with the various other adhesive lined heatshrinks and accessories we have everything you need to sleeve any motorsport wiring loom.
ATUMAdhesive lined heatshrink with 3:1 shrink ratio. Suitable for: sealing splices, boots, junctions etc. |
DR25Industry standard for covering motorsport wiring harnesses. Suitable for: wiring harness sleeving |
|
ES 2000Adhesive lined heatshrink with 4:1 shrink ratio. Suitable for: sealing splices, boots, junctions etc. |
LabelsIdentification labels for wiring harnesses, as well as full cartridges. Suitable for: identification labels |
Molded BootsIndustry standard for sealing connectors and junctions on DR25 looms. Suitable for: Autosport connectors, junctions etc. |
SCLSemi-rigid adhesive lined heatshrink with 2.5:1 shrink ratio. Suitable for: molded boot alternative, transitions, etc. |
Split BraidEasy to apply split braid wiring loom protection. Easier alternative to DR-25 heatshrink. Suitable for: simplified harness sleeving |
Split ConduitLow cost option for covering wiring harnesses. Suitable for: low cost harness sleeving |
Split braids unique split, semi-rigid braided construction makes it the ideal solution where ease of installation is of primary importance. |
NZ$5.80
*
|
|
5.72mm shrinks down to 1.27mm |
|
|
Split braids unique split, semi-rigid braided construction makes it the ideal solution where ease of installation is of primary importance. |
NZ$9.80
*
|
|
7.44mm shrinks down to 1.65mm. |
|
|
Split braids unique split, semi-rigid braided construction makes it the ideal solution where ease of installation is of primary importance. |
NZ$14.90
*
|
|
10.85mm shrinks down to 2.41mm |
|
|
Raychem SCL adhesive lined heatshrink. Forms a semirigid protection great for transitions and boots. Available in black 3/16", 1/4", 3/8", 1/2", 3/4" & 1" sizes (red available in 3/8"). |
from
NZ$16.00
*
|
Split braids unique split, semi-rigid braided construction makes it the ideal solution where ease of installation is of primary importance. |
NZ$13.50
*
|
|
Split braids unique split, semi-rigid braided construction makes it the ideal solution where ease of installation is of primary importance. |
NZ$18.50
*
|
|
Split conduit offers a low cost solution to sleeving your harnesses. With simple installation the split conduit is a great option for those on a budget. |
NZ$2.50
/ m
*
|
|
Split conduit offers a low cost solution to sleeving your harnesses. With simple installation the split conduit is a great option for those on a budget. |
NZ$2.00
/ m
*
|
|
17.78mm shrinks down to 4.45mm |
|
|
Dymo Rhino compatible yellow heatshrink tape cartridge, 12mm (7mm dia) x 2.5m. |
NZ$37.50
*
|
|
Split conduit offers a low cost solution to sleeving your harnesses. With simple installation the split conduit is a great option for those on a budget. |
NZ$4.79
/ m
*
|
|
Split conduit offers a low cost solution to sleeving your harnesses. With simple installation the split conduit is a great option for those on a budget. |
NZ$1.75
/ m
*
|
|
Dymo Rhino compatible yellow heatshrink tape cartridge, 19mm (11mm dia) x 2.5m. |
NZ$39.50
*
|
|
Dymo Rhino compatible yellow heatshrink tape cartridge, 6mm (3.5mm dia) x 2.5m. |
NZ$34.50
*
|
|
Adhesive lined clear heatshrink great for protecting labels on wiring looms. Sold in 1.2m (4ft) lengths. |
NZ$16.00
*
|
|
Dymo Rhino compatible yellow heatshrink tape cartridge, 9mm (5mm dia) x 2.5m. |
NZ$34.50
*
|
|
1 - 30 of 59 results |
|