Injectors By Flow Rate

Ford Falcon BA / BF Barra 1000cc direct fit set of 6 fuel injectors. Drop in replacement injector set. No additional parts required. Bosch non-modified fuel injector - excellent spray pattern same electrical connector as the OEM injector so no adapters...

Mitsubishi EVO 1 through 9 fuel injector kit - 1000cc Direct fit replacement injector set for all Mitsubishi EVO models except the EVOX high resistance injectors so ballast resistors must be removed includes new lower injector seal same electrical...

LS3, LS7, LSA, L76, L99 Fuel Injector Set - 1000cc - set of 8 Direct fit fuel injector no electrical adapter or plug changes require no o-ring adapters required Injectors flow approximately 1196cc/min at 58psi (4-bar) factory GM fuel rail pressure...

Xspurt 1000cc High Resistance Fuel Injector   Dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so your set of injectors is matched within 1% across the entire set. The length of these injectors is 58mm, or "3/4 length"...

Xspurt 1000cc Stubby Fuel Injector Dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so that your set of injectors is matched within 1% across the entire set. A modern injector solution for people who want serious...

LS3, LS7, LSA, L76, L99 Fuel Injector Set - Xspurt 1170cc/min fuel injector Direct fit fuel injector. For when 1000cc is just not enough. no electrical adapter or plug changes require no o-ring adapters required Injectors flow approximately...

Xspurt 1170cc/min fuel injector For when 1000cc is just not enough. Dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so your set of injectors is matched within 1% across the entire set. These are a 38mm long body injector...

Genuine Bosch 1550cc fuel injector A great solution for those looking for an unmodified injector that flows over 1000cc per minute. We purchase these injectors directly from Bosch Motorsport Australia 1584cc/min at 3 bar (43.5psi), up to 2,236cc/min at...

Xspurt 2200cc High Resistance CNG Injector Please read the warnings at the bottom of the specification list. 2200cc/min at 3 bar (43.5psi), up to 3,300cc/min at 9 bar high impedance (high resistance) so no need to add ballast resistors on some...

Sorry, this product is no longer available to order.  Siemens VDO have stopped making this injector.   The Siemens 220lb / 2400cc fuel injectors are the highest flowing fuel injectors we sell. Flowing 2433cc per minute at 43.5psi fuel rail...